A course in Linear and Integrated Circuits is an essential part of a well-rounded Electrical and Electronics Engineering curriculum in third semester. With hands-on experiments significantly improving the understanding and visualization of complex subject matters. The Linear Integrated Circuits lab course introduces the concept and application of operational amplifiers. Laboratory assignments clarify textbook formulas and examples, as well as help to close the gap between theory and real-life problems.
Electric Circuits Lab for second semester consists of all types of measuring instruments and cathode ray oscilloscope, audio oscillators, function generators and various types of decade boxes. Software such as MATLAB, EMTP are taught to the students in this lab to enable them to design, analyze & simulate and even compare with industry. This has been found to give immense practical utility to the students in their future career.
Labs Conducted:
- Linear and digital integrated circuits laboratory
- Electric circuit’s laboratory
Major Equipment List:
| S.NO |
EQUIPMENT NAME
|
QUANTITY |
| 1 |
ANALOG AND DIGITAL CONVERTER. |
4 |
| 2 |
DIGITAL AND ANALOG CONVERTER. |
4 |
| 3 |
FUNCTION GENERATOR. |
7 |
| 4 |
DUAL RPS(0-30)V,2AMPS. |
10 |
| 5 |
DIGITAL IC TRAINER KIT. |
15 |
| 6 |
ANALOG IC TRAINER KIT. |
4 |
| 7 |
CATHODE RAY OSCILLOSCOPE |
7 |
| 8 |
DIGITAL AND ANALOG IC TESTER |
1 |
| 9 |
MICROPROCESSOR 8085 KIT (MICRO 85LC) |
|
| 10 |
DMA CONTROLLER(VBMB 011) |
4 |
| 11 |
TEMPERATURE CONTROLLER(VBMB 030) |
4 |
| 12 |
STEPPER MOTOR WITH KEY BOARD
(VBMB 013A) |
4 |
| 13 |
TRAFFIC LIGHT CONTROL(TLC) |
2 |
| 14 |
KEYBORD&DISPLAY INTERFACE BOARD (VBMB 001) |
3 |
| 15 |
VGA VIDEO DISPLAY UNIT(VBMB 027) |
2 |
| Electric circuit’s laboratory |
| 1 |
CRO (OSC 5030) |
3 |
| 2 |
FUNCTION GENERATOR(0.2HZ-2MHZ) |
2
|
| 3 |
SINGLE Ø INDUCTANCE LOAD 10 |
1 |
| 4 |
3 Ø STAR CONNECTED LOAD 3KW |
2 |
| 5 |
AF SINGAL GENERATOR 3MHZ |
1 |
| 6 |
CRO 0.33MHZ DUAL CHANNEL |
4 |
| 7 |
FUNCTION GENERATOR (2MHZ) |
3 |
| 8 |
NON INDUCTIVE RESISTANCES 250 Ώ,5A |
5 |
| 9 |
DSO DUAL CHANNEL TDS2022B 200MHZ |
1 |
To enable the students to understand the behavior of semiconductor device based on experimentation. The end of the course the students will have ability to understand and analyse, linear and digital electronic circuits.
Labs Conducted:
Major Equipment List:
| S.NO |
EQUIPMENT NAME |
QUANTITY |
| 1. |
CRO-0.33MHZ |
3 |
| 2. |
CRO-30MHZ |
6 |
| 3. |
CRO-30MHZ |
4 |
| 4. |
CRO-30MHZ |
2 |
| 5. |
FUNCTION GENERATOR 2MHZ |
5 |
| |
FUNCTION GENERATOR-1MHZ |
3 |
| 6. |
FUNCTION GENERATOR-1MHZ |
7 |
| 7. |
DIFFERENTIAL AMPLIFIER USING FET
|
1
|
| 8. |
RPS-DUAL-30V/2A |
6 |
| 9. |
RPS-DUAL-30V/2A |
3 |
Electrical machines laboratory has two eyes - AC and DC machines encompassing the all types of latest AC and DC machines, generators and motors with loading arrangement, thyristor controlled DC Drives operated by main DC & AC panel board. Transformers and various starters, variacs, load banks also form part of the equipments.
Labs Conducted:
- Electrical Machines Lab – I
- Electrical Machines Lab - II
- Electrical Engineering & Control system Lab
Major Equipment List:
| S.No |
Name |
Qty |
| 1. |
COMPOUND MOTOR 5HP 19A |
1 |
| 2. |
DC SHUNT MOTOR 5HP 19A |
1 |
| 3. |
RESISTIVE LOAD 1Φ 3Kw |
4 |
| 4. |
AUTO TRANSFORMER 3Φ,8A 415V |
3 |
| 5. |
3ΦSLIP RING INDUCTION MOTOR -LOADING |
1 |
| 6. |
WATTMETER (LPF) 5/10A |
6 |
| 7. |
DC SERIES MOTOR- LOADING -2POINT TER,19A |
1 |
| 8. |
STATOR RESISTANCE STARTER |
3 |
| 9. |
SYNCHRONOUS MOTOR 3Φ (INDUCTION START) |
1 |
| 10. |
DISTRIBUTION PANEL BOARD |
1
|
| 11. |
3ΦSQUIRREL CAGE INDUCTION MOTOR |
1
|
| 12. |
RL LOAD WHEEL MOUNTED MESH 3Φ 10A |
2
|
| 13. |
DC SHUNT MOTOR 5HP 19A #GENERATOR |
1 |
| 14. |
DC SERIES GENERATOR 3Kw # SHUNT MOTOR,19A |
1 |
| 15. |
ALTERNATOR#DC SHUNT MOTOR 4.2A&19A |
1 |
| 16. |
ALTERNATOR#DC SHUNT MOTOR |
1 |
| 17. |
DC COMPOUND MOTOR # SHUNT GENERATOR 3Kw |
1 |
| 18 |
TACHOMETER (ANALOG) 17028 , 17650
|
11
|
| 19. |
DC SHUNT MOTOR 5HP 19A #GENERATOR 3Kw,13A |
1 |
| 20. |
COMPOUND GENERATO |
1 |
| 21. |
RECTIFIER UNIT M.S ENCLOSED415V 3Φ,100A |
1 |
| 22. |
DC SHUNT MOTOR #SHUNT GENERATOR |
1 |
| 23. |
ALTERNATOR#DC SHUNT MOTOR 7.5A |
2 |
This lab helps the students to study the switching devices, power devices and its applications in rectifier, inverter, chopper and resonant converter, to learn the PWM Techniques for both UPS and AC Drive applications. This lab is fully equipped with all types of modules like SCR Firing circuit module, SCR based half and fully controlled converter kit, IGBT based three phase PWM inverter module, chopper module’s based V/I commuted chopper module with firing module., CRO, Isolation Transfomer, single phase Auto Transformer Meters, Mosfet Based step Up and Step Down Choppers module
Control and Instrumentation plays vital role in the field of modern automation industry .The application of control and instrumentation helps the budding engineers to know the wide and various application in manufacturing, aircraft control, computer, process control industries, apart from that this lab helps the budding engineers with an adequate work experience/real time concepts in the measurement of different quantities and also helps to expertise in handing the instrument and able to measure the unknown parameters with optimum value/ realistic value. The lab is fully equipped with modern control and instrumentation equipments.
Labs Conducted:
- Power electronics and drives laboratory
- Control and instrumentation laboratory
Major Equipment List:
|
S.NO
|
EQUIPMENT NAME
|
QUANTITY
|
|
1
|
1Ø HALF CONTROL &
FULLY CONTROL CONVERTER
|
1
|
|
2
|
AUTO TRANSFORMER
|
1
|
|
3
|
IGBT CHOPPER
|
2
|
|
4
|
ISOLATION TRANSFORMER
|
4
|
|
5
|
MOSFET BASED CHOPPERS
|
1
|
|
6
|
OSCILLOSCOPE
|
5
|
|
7
|
PWM INVERTER –SINGLE PHASE
|
2
|
|
8
|
PWM INVERTER –THREE PHASE
|
1
|
|
9
|
PWM INVERTER –THREE PHASE
|
2
|
|
10
|
RESONANT DC-DC CONVERTER
|
4
|
|
11
|
SCR BASED VI COMMUTATED
CHOPPER
|
3
|
|
12
|
SINGLE PHASE SCR BASED HALF AND
FULLY CONTOLLED CONVERTER
|
2
|
|
13
|
STUDY OF TRANSIENT KIT
|
1
|
|
Control and instrumentation laboratory
|
|
1.
|
AC SERVO MOTOR KIT
|
1
|
|
2.
|
DC SHUNT MOTOR # SHUNT GENERATOR KIT
|
2
|
|
3.
|
P, PI, PID CONTROL WITH INTERFACING KIT
|
1
|
|
4.
|
TRANSFER FUNCTION OF AC SERVO MOTOR TRAINER KIT
|
1
|
|
5.
|
TRANSFER FUNCTION OF DC SERVO MOTOR TRAINER KIT
|
1
|
|
6.
|
TRANSFER FUNCTION OF DC GENERATOR TRAINER KIT
|
1
|
|
7.
|
TRANSFER FUNCTION OF DC MOTOR TRAINER KIT
|
1
|
|
8.
|
AC POSITION CONTROL TRAINER KIT
|
1
|
|
9.
|
DC POSITION CONTROL TRAINER KIT
|
1
|
|
10.
|
ANALOG SIMULATION XPO-PID CONTROLLER KIT
|
1
|
|
11.
|
SEPARATELY EXCITED SHUNT GEN
|
1
|
|
12.
|
AF SIGNAL GENERATOR
|
1
|
|
13.
|
DSO DUAL CHANNEL TDS2012B, 100MHZ
|
1
|
|
14.
|
SYNCHROS TRANSMITTER & RECEIVER
|
1
|
|
15.
|
CRO
|
2
|
|
16.
|
3ø Auto Transformer
|
1
|
|
17.
|
Schering Bridge
|
2
|
|
18.
|
Pressure Measurement Kit
|
1
|
|
19.
|
LVDT Trainer Kit
|
2
|
|
20.
|
Iron Losses Set Up
|
1
|
Enables to acquire software development skills and experience in the usage of standard packages necessary for analysis and simulation of power system required for its planning operation and control.
Labs Conducted:
- Power System Simulation Lab
- Control and Instrumentation Lab
Major Equipment List:
Computer systems – Intel core i3 @ 2.93 Ghz, 4GB DDR3 RAM, 500 GB HDD SATA, 18,5” LED Monitor (33)
Software – MATLAB R2011b, ETAP 7.5 (10 user license)
|
S.NO
|
NAME OF THE EQUIPMENT
|
QUANTITY
|
|
1
|
ETAP SOFTWARE
|
1 (10 users)
|
|
2
|
PERSONAL COMPUTER – I3 PROCESSOR, 4GB RAM
|
34
|
|
3
|
DOT MATRIX PRINTER
|
1
|
|
4
|
HP LASER JET PRINTER
|
1
|
|
5
|
40 KVA ONLINE UPS SYSTEM (SHARED)
|
1
|
